Page 1 of 1

4L60E & Muncie 4sp

Posted: Sat Feb 11, 2012 9:31 pm
by bobracing
Contact: James
509-2 zero 5- 9 three 77
or rjewing99 at charter dot net
Located in Kennewick WA

Only trades:
9.5 sf 14 bolt with 6 lugs, 4.10 gears, 88-98, 4x4
3/4 or 1 ton pre-88 axles, 4.56 or lower

Engine sold
1993 4.3 Vortec transmission out of 2wd S10 Blazer.
trans & torque converter
Miles: unknown
trans: $150


Muncie: $500

numbers are listed below, I'm told it's a M20 with the 2.52 1st gear.

THIS TRANS HAS NO TAILSHAFT, IT HAS AN ADAPTER TO A SIX (6) SPLINE DANA 18/20 TRANSFER CASE.

All that is included:
trans, bellhousing (iron not Al and has the extra bolt on top), shifter, pressure plate, clutch, flywheel, flywheel cover, NO tailhousing has Dana18 adapter.

Serial Number:
P7R04
Muncie Plant - Sept 04 1967

Case number:
3885010
Years: 1965 - 1967 Ratios: M20 2.52 1st , M21 2.20 1st, M22 2.20 1st
1966 -1967 - 1" Bore Patent Number

Side cover:
3884685 (Cover issued with "584" tail stud type shift shafts)

Tailhousing (not present has Dana18 adapter):
3857584 1966 -- 1970 Passenger side speedo, 27 spline

Image

Image

Image

Image

Image

Posted: Sun Feb 12, 2012 12:54 pm
by bobracing
updated with some pictures