Page 1 of 1
Misc Cherokee Parts Needed
Posted: Sun Mar 23, 2014 10:39 am
by mattawajeep
So, I'm going to be running into town early next week to hunt for the last few parts I need to put an AW4 an NP242 in my Grand Cherokee.
I'm hoping American or Pasco Auto wrecking will have what I need but I figured asking here might not hurt.
Here's my shopping list:
Cherokee TCM and Trans Harness Plugs - From a 92-96 Cherokee
Cherokee Dust Shields / Engine bell housing spacer thingy - from any AW4 Jeep
Cherokee Shifter Bezel - I think any year Cherokee with AW4 will work
AW4 Dipstick and Tube - Any AW4 jeep
Cooler line stuff - I think OEM Cherokee lines will work, my trans has the fittings
Torque Convertor Bolts - Any AW4 Jeep
Bellhousing Bolts
Posted: Sun Mar 23, 2014 12:01 pm
by OldGreen
If I can get the old tranny out today, I'll have the dipstick tube for you. I'll let you know. I may have the plug too. You got a pic of that?
Posted: Sun Mar 23, 2014 12:25 pm
by mattawajeep
OldGreen wrote:If I can get the old tranny out today, I'll have the dipstick tube for you. I'll let you know. I may have the plug too. You got a pic of that?
You pulling the AW4 out of the 2 door? What are you replacing it with?
Here's what the plugs look like on the transmission side, there are two of them:
And here's what the computer side looks like:
The transmission side plugs aren't a big deal, as I can just make something work with weather pack connectors, though it would be easier with them.
Posted: Mon Mar 24, 2014 6:29 pm
by mattawajeep
Hey Jim you get the transmission out? I'm gonna be in town sometime tomorrow, will you be around?
Posted: Tue Mar 25, 2014 7:57 pm
by mattawajeep
Well, I was able to collect most of what I need, as well as a few extra things that weren't on my list.
However, I still need:
Dust Shields
TCU Plug
I think I can get the dust shields from pasco auto wrecking, it could just take a while. They have quite a few of them still in the vehicles, but won't be taking them apart anytime soon. Might try the dealership tomorrow and see if they have repair plugs for sale.
Posted: Tue Mar 25, 2014 8:06 pm
by commando14
You just need the plug that plugs into the TCU? I might have one.. will check tomorrow.
Posted: Tue Mar 25, 2014 8:14 pm
by mattawajeep
commando14 wrote:You just need the plug that plugs into the TCU? I might have one.. will check tomorrow.
Yup, the plug that goes into the TCU. I'm not really clear on exactly which years will work, probably 92-96 though earlier versions might also work. If you have one that'd be awesome.
Posted: Wed Mar 26, 2014 4:48 pm
by mattawajeep
Went back to pasco auto wrecking this evening and was able to find everything I needed. The swap should be all set to go.