Page 1 of 1
TJ vs LJ control arm lengths?
Posted: Fri Apr 18, 2014 12:05 pm
by TJDave
I know the fronts are the same. Does anyone know if the rears are the same? Specifically the uppers?
Stock TJ rear uppers are 13.25" between the bolt centers IIRC. Could anyone with an LJ and a stock rear upper CA laying around measure it for me?
Thank you.
Posted: Fri Apr 18, 2014 12:09 pm
by OldGreen
They are the same. At least they interchange exactly.
Posted: Fri Apr 18, 2014 12:19 pm
by TJDave
Thank you sir! I now know what I must do.
Posted: Fri Apr 18, 2014 2:56 pm
by scumby
TJDave wrote:Thank you sir! I now know what I must do.
AND........
Posted: Fri Apr 18, 2014 4:53 pm
by TJDave
scumby wrote:TJDave wrote:Thank you sir! I now know what I must do.
AND........
You know already when I was looking under the rear of Scumby 2 today.
The truss and arms are only listed for an LJ on the website.
Thank you for the help diagnosing my front locker problem by the way.
Do you think I could just cut off that messed up connector and just use some waterproof wire connections?
Posted: Fri Apr 18, 2014 6:49 pm
by scumby
still was having a hard time getting any resistance reading on the locker side of the wiring. we need to figure out what the resistance should be of that locker engagement mechanism. before i try putting new cnnectors on i would try applying 12v directly to the wiring.