D30 non-disconnect HP Front end

[OldGreen]

XJ/TJ/ZJ

So, you have a TJ and want to regear and get a stronger axle. . .

HP D30 Housing with knuckles. Use YOUR shafts.
HP 4.10 gear set (you supply carrier and/or locker)
Good used calipers, rotors, and unit bearings

If you use a full case locker and 760X shafts, you end up with a front end that is as strong as an LP D44 but has MORE ground clearance and BOLTS IN to your TJ (or ZJ or YJ)

Comes with FREE 3 series carrier and 3.07 gears, a track bar and some steering stuff. Likely disassembled. . .but I can put it back together if you would like me to.

Available for pickup this Saturday afternoon. Delivery available, but you have to help pick the dang thing up. It are heavy.

$100. Open to trades. ZJ or aftermarket TJ steering linkage, extended rear XJ bumpstops. . .whatcha got? Cash, of course > All

[OldGreen]

Well. . .looks like this is going to scrap.

Also have 8.25 parts if anybody needs anything

I will keep the 4.10 gears for the HP30 in case someone needs them later.

$50 for the gearset. Good used Yukon gears.

[tobyw]

Keep the carrier... I should know more by Monday...

[OldGreen]

In and done.